Carbon Steel Electrode

- Jan 24, 2018 -

Carbon steel electrode

Carbon steel electrode (the deposited metal tensile strength are less than or equal to 500MPa or 50kgf / mm2) for low carbon steel and low alloy steel welding.

For low-hydrogen, iron-type electrode, the electrode before welding must be above 350 ℃ baking, as far as possible with the baking with the use of how much how much baking principle, otherwise it will have welding defects (such as porosity, slag, Cracks, poor process performance, etc.). Cellulose type electrode, should be strictly in accordance with the instructions baking temperature baking, the temperature is too high, it will burn to the cellulose in the skin, destroy the electrode inherent process performance.

When using low-hydrogen electrode, the welder should stay in the upwind position to enhance exhaust ventilation and prevent the welding fumes from damaging the body.

The number of low-hydrogen electrode baking its no more than twice as much as possible to prevent brittle skin off, fall off.

Previous: Oxygen Cutting The Main Welding Materials Next: Welding Method

Related News

Related Products

  • Fused Submerged Arc Welding Flux HJ350
  • Sintered Submerged Arc Welding Flux SJ101Q
  • AWS ENiCrFe-2 Nickel Alloy Welding Electrode
  • AWS ER-430 Stainless Steel Welding Wire
  • ER5183 Aluminum Welding Wire
  • Gas Shielded Welding Gun